Pentair INTELLITOUCH User Manual

IntelliTouch
®
Control System User’s Guide
55
MENU/SETP/EQUIP/INTELLICHLOR
BACK
EXIT
MODEL NAME HERE
STATUS
DOWN
CONTROL ENABLED
WATER SALT LEVEL
CHLOR
OK - NO ERRORS
2900 PPM
UPHOURS TO RUN 24
YES
SUPER
SAVE
MENU/SETP/EQUIP/INTELLICHLOR
BACK
EXIT
MODEL NAME HERE
STATUS
CONTROL ENABLED
WATER SALT LEVEL
SUPER CHLOR
OK - NO ERRORS
2900 PPM
22 @ 100%HOURS REMAINING
YES
'CANCEL'
SAVE
MENU SETUP EQUIPMENT CHLORINATOR
Getting There
Super Chlorinate the Pool Water
Periodically, it may be necessary to “super chlorinate” the pool and/or spa.
Go to the Chlorinator screen.
1. Press the SUPERCHLOR button.
2. The default run time for super chlorination is 24 hours.
Press the buttons next to HOURS TO RUN to change
the run time to super chlorinate.
3. Press Savewhen done. The chlorinator will start super
chlorination mode (100%) and automatically switch
on the lter pump. When super chlorination has been
completed the system will return to normal operation.
4. Tocancelsuperchlorination: Go back to the
Chlorinator Screen. The time left for super chlorination
is displayed.
5. Press the button under CancelSuperChlor.
6. Press Exitto return to the main screen.
Note: For information about wiring a salt chlorine generator
to the IntelliTouch system , see “Wiring IntelliTouch to a Salt
Chlorine Generator,” on page 112.

Pentair INTELLITOUCH Specifications

General

Remote Access	Yes, via mobile app
Lighting Control	Yes
Automation	Yes
Expandability	Yes
Interface	Touchscreen, mobile app
Enclosure Rating	NEMA 3R
User Interface	Touchscreen
Compatibility	Pentair equipment
Connectivity	Ethernet, Wireless
Mobile Control	Yes
Remote Control	Yes
Communication Protocol	Pentair proprietary
Control Type	Automated