Pentair INTELLITOUCH User Manual

IntelliTouch
®
Control System User’s Guide
113
Glossary
Actuators: Motorized accessory for turning valves and diverting water; model CVA24T.
ColorSet: Allows a combination of up to 12 SAm, SAL, IntelliBrite or Fiberworks lighting circuits to be
preset to specic colors.
ColorSwim: Allows a combination of up to 12 SAm, SAL, IntelliBrite or Fiberworks lighting circuits to
be preset to transition through colors in sequence. This gives the appearance of colors dancing across your
water.
ComponentID:Unique identier that tells the system what each component is.
Controller:Indoor Control Panel or MobileTouch wireless controller.
ExpansionKit:A kit that includes additional auxiliaries to an existing Personality Kit. Requires a Load
Center or Power Center for each Expansion Kit.
FeatureCircuits: Programmable circuits that may control relays, macros, and/or valve actuators.
Firmware:Factory installed operating system software dedicated for use with the IntelliTouch system;
each type of control panel has its own rmware and release level.
FreezeProtection:Switches on a circuit if the air temperature drops below 35° F.
HighVoltageCompartment:Large lower right compartment of Load Center or Power Center for all high
voltage wiring including circuit breakers, relays, and GFCI.
HouseAddress:Signal that allows Each IntelliTouch system the ability to group all its attached
components under a single system identication; prevents the system from confusing its components from
components on a neighbor’s system.
ICP:Indoor Control Panel.
IndoorControlPanel:Fourteen button remote controller with LCD (liquid crystal display) is wired to the
Personality board in the Power/Load Center.
iS4: Four function Spa-Side remote. Wall or deck mounted.
SpaCommand: Ten function spa-side remote with temperature changing capability and display. Wall or
deck mounted.
LoadCenter: Metal enclosure with power relays, transformer, and circuit breakers. The Load Center
is Installed prior to Personality Kit installation. Used for distributing power for controlling IntelliTouch
Systems. Also known as the “sub-panel.”
LowVoltageCompartment: Top compartment of Load Center or Power Center for all low voltage wiring.
LowVoltageRaceway: Vertical space in the left side of Power/Load Center for low voltage cabling.
Macro:Feature circuit that allows you to combine circuits to activate together.
MobileTouch®Controller: Wireless controller for the IntelliTouch Systems with all the functionality of
the Indoor Control Panel.
MudBox: Enclosure to provide mounting features for iS10 spa-side remote that is cast into gunite,
concrete, or other spa wall/deck construction.
OutdoorControlPanel: Control panel with exible hinge installed in upper portion of Load Center or
Power Center to control IntelliTouch Control Systems.

Pentair INTELLITOUCH Specifications

General

Remote Access	Yes, via mobile app
Lighting Control	Yes
Automation	Yes
Expandability	Yes
Interface	Touchscreen, mobile app
Enclosure Rating	NEMA 3R
User Interface	Touchscreen
Compatibility	Pentair equipment
Connectivity	Ethernet, Wireless
Mobile Control	Yes
Remote Control	Yes
Communication Protocol	Pentair proprietary
Control Type	Automated