Name: Pentair INTELLITOUCH
Brand: Pentair
Rating: 4 (1 reviews)

To Next Page

To Previous Page

IntelliTouch

Control System User’s Guide

Conﬁguring Valve Actuators (Controlled by AUX or Feature Circuit)

All IntelliTouch systems can drive two auxiliary valve actuators (A and B) for applications such as solar

heating and water features. With the addition of the Valve Module (P/N 520285), installed in the Load

Center or Power Center, the system will accommodate up to three additional actuators (C, D, and E).

AUXcircuit or FEATURE circuit can control auxiliary valve actuators. By using Feature circuits

to control valve actuators, you can conserve your AUX circuits for high voltage relays for controlling

pumps and lights. Use Macros to couple valve actuators with AUX circuits for specic applications.

Note: All Personality boards (including i5x and i10x) has two valve outputs A & B. With the addition

of the Valve Module (P/N 520285) board that connects to the Personality board, three additional valve

operators can be added to the system.

Conﬁguring Valve Actuators

Note: If Expansion Centers are a part of the system, before this screen, you must select which main

Load Center or Power Center you wish to congure. The Load Center or Power Center number

matches display number (1 through 4).

Go to the Congure Valves screen.

1. Select the button next to the valve actuator you wish to

congure. Keep pressing the button until you nd the

circuit name which you would like to use to control the

valve actuator.

ValveA: Resides on the IntelliTouch Personality board.

If solar heating is setup AND NOT congured as a heat

pump, then this valve is dedicated for controlling the solar

heating valve actuator.

ValveB: Resides on the IntelliTouch Personality board

next to Valve A.

ValvesC,D,E:Reside on the optional Valve Module

board that may be plugged into the IntelliTouch Personality board in any Load Center or Power

Center.

2. Repeat the above steps for each valve actuator.

3. Press Savewhen done.

4. Press Exitto return to main screen.

MENU SETUP ADVANCED CONFIGURE VALVES

Getting There

Other manuals for Pentair INTELLITOUCH

Questions and Answers:

Need help?

Do you have a question about the Pentair INTELLITOUCH and is the answer not in the manual?

General