Software Reference 112
P/N CLS151164 Rev. B LabChip GX Touch/GXII Touch User Manual PerkinElmer, Inc.
• Well Annotation Location button (arrow) - The location of the
well annotation. Touch the button to change the location: upper
right, upper left, lower right, lower left, or hidden.
• Well Annotation drop-down list - Displays the selected well
property above or below the graph.
View Options
• Show Data Points check box - If selected, displays a dot on
the graph at the location of each data point.
• Show Peak Baselines check box- If selected, displays the
baseline for each peak on the graph.
• Only Annotate Expected Peaks check box - If selected, only
the peaks that are labeled as Expected Fragments, Expected
Proteins or Expected Glycans display the annotations. If not
selected, all peaks display the annotations.
• Show Smears check box - If selected, displays smears as a
colored line on the trace and displays the smear baseline. This
option only displays if smears are defined in the assay file.
X Axis Scale
• Time radio button - If selected, the unit displayed on the X Axis
is time.
• Size radio button - If selected, the unit displayed on the X Axis
is size.
• Log Size radio button - If selected, the unit displayed on the X
Axis is size on a logarithmic scale.
• Grid Style check box - Displays grid lines on the graph:
vertical, horizontal, both, or none. Touch the button to cycle
through the grid options.
Overlay
• Overlay Legend button - If multiple wells are displayed in the
EGram tab, specifies the location where the legend displays on
the graph. The legend shows the color used for each well.
• Overlay Offset text box- Offsets each of the graphs on the X
axis, by the RFU value specified.
To Next Page
Loading...
Need help?
General
