Creating a Run File 54
P/N CLS151164 Rev. B LabChip GX Touch/GXII Touch User Manual PerkinElmer, Inc.
Creating a Run File
A Run File contains all of the settings required to run a plate,
including all the tab settings on the Run Window. Importing a Run
File on the Select Wells Tab changes the settings on all tabs.
To create a run file if desired:
1 If the run will include auto export data, touch Tools, touch the
Export Setup Tab, and then select the desired data to export.
See Selecting the Auto Export Settings on page 46 for details.
2 Touch the Home button and then touch the Run button.
3 Select the desired assay, plate and sampling options and select
the wells to sample on the Select Wells Tab. See Running an
Assay on page 32 for details.
4 Touch the Next button to open the Setup Run Tab.
5 Select the desired run options on the Setup Run Tab.
6 Touch the Next button to open the Start Run Tab.
7 Touch the Export button . The Save Run Parameters
to File window opens.
8 Type the desired name for the run file, select the file location,
and touch the Save button to save the run file.
To Next Page
Loading...
Need help?
General
