PerkinElmer LabChip GXII Touch User Manual

LabChip GX Touch/GXII Touch Instrument Description 128
P/N CLS151164 Rev. B LabChip GX Touch/GXII Touch User Manual PerkinElmer, Inc.
Rear Connectors
The rear connector is used to connect the LabChip GX Touch/GXII
Touch instrument to the power supply.
Figure 52. Rear Connector
The following connectors are located on the back of the instrument:
AC Power
Cable
Plug the power cord into this connector and a power outlet.
WARNING
Appliance inlet is disconnecting device. Place device or equipment in
a manner so that disconnecting device is accessible at all times.

PerkinElmer LabChip GXII Touch Specifications

General

Brand	PerkinElmer
Model	LabChip GXII Touch
Category	Measuring Instruments
Language	English