Software Reference 116
P/N CLS151164 Rev. B LabChip GX Touch/GXII Touch User Manual PerkinElmer, Inc.
Run Info Tab
Use the Run Info tab to review or print information about the last
completed run or calibration. To open the Run Info Tab, touch the
Views button on the Navigation Bar and then touch the Run Info
button.
Figure 46. Run Info Tab
The Run Info tab contains the following information:
Assay Family - The assay family selected for the chip (selected
when the chip is inserted in the instrument).
Assay Name - The name of the assay that was run on the plate.
Software Version - The version of LabChip GX Touch software
used to run the plate.
Firmware Version - The version of firmware on the instrument used
to run the plate.
Instrument Name - The name of the instrument that was used to
run the plate and create the data file.
Instrument Serial Number - The serial number of the instrument
used to run the plate.
Operator Name - The name of the operator, if specified.
Data File Path - The location where the data file was saved during
the run.
To Next Page
Loading...
Need help?
General
