Software Reference 76
P/N CLS151164 Rev. B LabChip GX Touch/GXII Touch User Manual PerkinElmer, Inc.
Prime and Calibrate Window
Use the Prime and Calibrate window to calibrate the instrument to
run a Protein Clear HR assay. To open the Prime and Calibrate
window, touch the Prime and Calibrate button on the Home
Window.
Figure 21. Prime and Calibrate Window
The Prime and Calibrate window contains the following options:
Change Assay Folder button - Touch to select the folder that
contains the desired assays.
Select Assay drop-down list - Touch to select the assay to run.
A1 button - Touch to enlarge the plate diagram to select the well
containing the VeriMAb sample.
Skip Prime step check box - Only displays if a Protein Clear HR
chip has already been calibrated. If selected, the chip is calibrated
without a second prime.
Select Plate Type drop-down list - Select the desired plate type to
be used during the run.
Prime and Calibrate button - Starts the calibration process.
To Next Page
Loading...
Need help?
General
