Software Reference 119
P/N CLS151164 Rev. B LabChip GX Touch/GXII Touch User Manual PerkinElmer, Inc.
EventLog Tab
Use the EventLog tab to view events and errors that occur during
the current run or calibration, or during a previous run or calibration.
To open the EventLog tab, touch the Views button on the
Navigation Bar and then touch the EventLog button.
Figure 47. EventLog Tab
The following tabs display at the top of the EventLog tab:
• Current Events Tab - Displays the events that occurred during
the current session.
• Past Events Tab - Displays all events from all previous
sessions. If more than 10,000 events occurred, scrolling
controls for Page Up (earlier events) and Page Down (later
events) display.
• Plate Events Tab - Displays the plate events that occurred
during the run of that plate.
• Search Tab - Use to search for specified text in past events,
current events, plate events, or all events.
The tables on the EventLog tabs contain the following columns:
• Date - The date and time the event or error occurred.
• Source - The system component that generated the event or
error.
• Event Code - The event/error ID number used by PerkinElmer
to troubleshoot errors.
• Description - Text describing the event or error.
To Next Page
Loading...
Need help?
General
