Software Reference 117
P/N CLS151164 Rev. B LabChip GX Touch/GXII Touch User Manual PerkinElmer, Inc.
Run Info Tab (Continued)
Auto Export Options - Displays AutoExport if the Auto Export
check box was selected on the Setup Run Tab. Displays AutoPrint
if the Auto Print check box was selected on the Setup Run Tab.
Displays AutoExport and AutoPrint if the Auto Export and Auto
Print check boxes were selected on the Setup Run Tab. Displays
AutoExport deferred to plate completion and AutoPrint if the
Auto Export, Auto Print and Defer Export to Plate Completion check
boxes were selected for the run.
Barcode - The barcode if a barcode was read. Displays “N/A” if no
barcode was read.
Plate Type - The number of wells in the plate, either 96 or 384.
Plate Name - The plate name selected in the Setup Run Tab.
Plate Height - The distance from the bottom of the plate to the top
of the plate.
Run Start Date/Time - The date and time that the run was started.
Number of Cycles - The number of times to repeat the assay on
the plate.
Sip Order - Column-wise or row-wise as selected on the Select
Wells Tab.
Selected Samples - List of the wells selected in the run.
Sample Saver - Displays True if Sample Sips was greater than one
for the run, and False if Sample Sips was one.
Sample Saver Repeats - The number of sample sips selected.
Sample Counts - The number of samples processed in the run.
Well Spacing - The distance between wells on the plate.
Well Depth - The distance from the top of the plate to the bottom of
the well.
Sip Height - The distance from the bottom of the well to the bottom
of the sipper when the sipper is positioned to sip sample from the
well.
X Margin - The distance from the outer edge of the plate to the
center of well A1 in the X direction.
Y Margin - The distance from the outer edge of the plate to the
center of well A1 in the Y direction.
Chip ID - The ID number of the Chip used to run the plate.
To Next Page
Loading...
Need help?
General
