All-New Event Presentation Switching Solutions
User Manual
7 Event Management Software PixelFlow
The sampling format of the output
The bit depth of the output, i.e., the binary digits to represent a
single color
Configure Output Timing
Configure the resolution and frame rate of the output. You can select the standard
resolution provided by the device, customize a resolution, or set the advanced
parameters.
Prerequisites
The back-end device EDID is obtained.
Notes
It is recommended the advanced settings are carried out by the trained personnel
only.
Interface Example (P20)
Description
On the Timing tab interface, configure the following parameters and click Apply after
the settings.
To Next Page
Loading...