PIXELHUE P20 - Page 154

All-New Event Presentation Switching Solutions
User Manual
7 Event Management Software PixelFlow
www.pixelhue.com
148
Interface Example (P20)
Description
On the Output tab interface, configure the following parameters and click Apply.
Parameter
Sub-Parameter
Description
Resolution
-
The number of horizontal pixels and vertical pixels of
the image
Config method:

Select the desired resolution from the drop-down
list.

Select Custom from the drop-down list, and then
set the width and height values respectively.
Frame Rate
-
The image frames every second (unit: Hz)
Advanced
H Total
Total pixel count per line
H Active
The horizontal size in pixels of the active area
H Front Porch
The offset between the end of the active area and the
beginning of the H sync
H Sync
The horizontal sync width in pixels (or between
pixels)
H Polarity
The polarity of the horizontal sync pulse
V Total
Total pixel count per column
V Active
The vertical size in pixels of the active area