PIXELHUE P20 - Page 50

All-New Event Presentation Switching Solutions
User Manual
6 Menu Operations
www.pixelhue.com
44
No.
Description
switch between the screens.

When Test Pattern, FTB or Freeze is turned on, Test Pattern
FTB or FRZ is displayed at the top of this section.

The screen resolution is displayed on the right of this
section.

The layer resource usage is displayed at the bottom of this
section.
Layer source status:

When an input source name is displayed, it indicates that
the source is selected. When the source name is in green,
the source is normal. When the source name is in gray, it
indicates no signal. M denotes that it is a MAIN layer.

When N/A is displayed, no input source is selected and the
layer is blank.
3
GENLOCK
Signal synchronization status
For details, see 6.1.11.1 Set Synchronization Signal Source.
BACKUP
Device backup on/off
MODE
Working mode of the device

Switcher

PGM Only
For details, see 6.1.12 Mode.
EFFECTS
Transition effect

Cut

Fade
For details, see 6.1.7 Transition.
4
OUTPUT
Displays the output connector statuses.

When an output connector icon is in green, an output
device is connected.

When an output connector icon is in blue, no output
device is connected.

When the border of an output connector icon is in orange,
the connector is used for copying output.
On the home screen, press the knob to access the main menu screen and complete
relevant settings. The following sections will describe menu operations in detail.