Planet WGSW-404 - Page 215

- 207 -
F
IGURE
6-10 E
XAMPLE OF
C
HANGING
P
ORT
C
ONFIGURATION
2. In the Port column, click the port you want to configure. A Port Configuration window similar to the
following appears.
F
IGURE
6-11 P
ORT
C
ONFIGURATION
W
INDOW
3. Under Admin Setting, enable or disable the admin setting for the port:
 Up places the port in the UP state. In this state, packets can be switched to and from the port.
 Down places the port in the DOWN state. In this state, packets cannot be switched to and
from the port.