Under certain conditions, may not work:
1 - Water frozen onto the top of the
sensors.
2 - When dirt, mud, ice or snow cover
the sensors.
3 - Driving on rough surfaces, gravel
roads, grass, bump or on a hill.
4 - When the vehicle is overloaded, the
vehicle will become low in height
and make the ultrasonic signals
nearer the obstructions.
5 - Do not spray water directly on the
sensors with high-pressure water
hose.
6 - Do not spray water directly on the
sensors with high-pressure water
nozzle.
Clean the sensors when dirt caused with
a cleaning cloth or spray with low-pres-
sure water.
Drive vehicle slowly. The sensors may
not sense small or narrow objects.
DOIUW006R19010
103
Identifier: MANOWN001SAGAMC2DOMASEAN Generated: 27.09.2022 11:44:41 a.m.
To Next Page
Loading...