Multi information display
OWN005INSCO21034
Meter controller
DOINW005R19011
A – Control button on the meter (to
control multi info display)
Instantaneous Fuel Consumption
(IFC)
This displays the instantaneous fuel
consumption from the current fuel used
and the distance since the last IFC reset.
The current fuel used is an accumulated
value of the injected fuel quantity.
Average Fuel Consumption (AFC)
This displays the average fuel consump-
tion from the last reset to the present
time.
Method to reset AFC
While in AFC interface, long press the
control button (A) at the meter.
Distance to empty (DTE)
Displays the approximate driving range
(how many more kilometers or miles you
can drive).
When the driving range falls below ap-
proximately 50 km (30 miles), “- - -” is
displayed. Refuel as soon as possible.
Distance to empty (DTE) mileage is de-
pending on the driving pattern's of the
driver. It is calculated using Average Fuel
Consumption (AFC) value which highly
dependent on the way driver is pressing
the fuel pedal.
High AFC value will result in low DTE
value. However, driver can reset the DTE
value by resetting the AFC value.
71
Identifier: MANOWN001SAGAMC2DOMASEAN Generated: 27.09.2022 11:44:41 a.m.
To Next Page
Loading...