Change a Blown Fuse
OWN009EMERG16021
DOIAW009R10004
A – Normal fuse
B – Blown fuse
1. Before you replace a fuse, always
turn off the electrical item and put
the engine switch in the LOCK posi-
tion.
2. Remove the fuse box cover.
3. Refer to the table of the load capa-
cities for the fuses. Check the fuse
that is related to the problem.
DOIUW009R16023
4. There is a puller and spare-fuses at-
tached to the fuse box cover (inside
the vehicle).
DOIKW009R07012
5. Remove the fuse puller from the fuse
housing.
6. Hold the puller as shown in the illus-
tration.
7. Push the puller on the identified fuse
until a click sound is heard.
8. Pull the fuse straight away from the
fuse housing.
9. Check the identified fuse. If the fuse
is not blown, immediately, contact
an authorised PROTON service outlet
for inspection.
10. If the fuse is blown, replace with a
new fuse of the same capacity and
safely insert to the clip.
Replacement of battery for
remote key OWN009EMERG21027
Key: Type A & B
When the warning light indicates key
fob’s battery is low, replace with new
battery based on steps below :
DOIQW009R12032
1 - Push release button to flip the key
blade.
126
For Emergencies
Identifier: MANOWN001SAGAMC2DOMASEAN Generated: 27.09.2022 11:44:41 a.m.
To Next Page
Loading...