(2) Try locate the keyfob on Start Stop
Button surface
Refer Indicator and Warning lamps topic
on page 66 for details.
To turn OFF the engine
1 - Place the gear shift lever to P (Park)
position
DOIUW006R22006
2 - Press the start stop button (A). The
indicator light (B) will go off.
DOIRW006R14028
NOTE
If the gear selection lever is not in P
(park), you can turn off the engine by
pressing the lock button at the remote
transmitter.
Illuminated engine start/stop button
DOIQW006R11022
Whenever the front door is opened, the
engine start/stop button’s light (A) will
illuminate for your convenience.
Engine start/stop button status
OFF
Engine start/stop button’s light (B) turns
NO LIGHT during OFF mode.
To turn off the engine and completely
shut down the system,
Press the engine start/stop button once
with the shift lever in the P (Park) posi-
tion. If the gear selector lever is not in
the “P” position (R,N,D,S), then press
the lock button at the remote transmit-
ter to completely shut down the system.
NOTE
In case where the driver’s door is opened
and a buzzer sounds continuously, this
is to remind the driver to press the start
stop button once again. The buzzer will
off once the system is completely shut
down.
CAUTION
EMERGENCY STOP: You are able to
turn off the running engine
(START/RUN) or vehicle power (ON),
only when the vehicle is not in mo-
tion. In an emergency situation
while the vehicle is in motion, you
are able to turn the engine off and
to “ACC” position by pressing the
engine start/stop button for more
than 5 seconds or 5 times consecut-
ively.
ACC (Accessory)
The engine start/stop button’s light (B)
turns AMBER during “ACC” mode.
Press the engine start/stop button while
it is in the “OFF” position without de-
pressing the brake pedal.
During “ACC” electrical accessories are
operational.
Do not leave the engine start/stop but-
ton in the “ACC” position for a long
84
Starting and Driving
Identifier: MANOWN001SAGAMC2DOMASEAN Generated: 27.09.2022 11:44:41 a.m.
To Next Page
Loading...