Qimarox PRORUNNER Mk5 User Manual

Maintenance gravity wheel conveyor
100 UM-PRORUNNER_Mk5-1.2-EN-US
11.2 Preventive maintenance schedule, wheels of the gravity
conveyor
11.2.1 Daily maintenance
/i
11.2.2 Weekly maintenance
/i
11.2.3 Monthly maintenance
/i
Item Task Action when required by the
check
Guards and covers Check for visible damage. Replace damaged guards and /
or covers.
Check if the mounting materials
are present and have been cor-
rectly placed.
Place the mounting materials or
correct the way in which they
have been fastened.
Entire machine Check for visible dirt. Clean the machine. Refer to
section 11.3.
Item Task Action when required by the
check
Wheels Check for visible damage of the
running surface and bearings.
Replace the wheels. Refer to
section 11.5.
Clean. Refer to section 11.3.
Check for running sounds. Replace the wheels that are
making running sounds. Refer
to section 11.5.
Make sure the roller runs freely
and smoothly.
Replace the roller. Refer to sec-
tion 11.5.
Wheels of the guide Check for dirt. Clean. Refer to section 11.3.
Check for visible deformation. Replace the roller. Refer to sec-
tion 11.5.
Check if the fastening bolt on
the wheel guide is present and
has been correctly fixed.
Item Task Action when required by the
check
Photocells Check for visible damage. Replace the photocell and the
reflector if necessary. Refer to
section 11.5.
Check for loose parts. Fasten loose parts.
Clean. Refer to section 11.3.
Cabling Make sure that all cables are
securely fastened.
Connect the cables again if
necessary.

Qimarox PRORUNNER Mk5 Specifications

General

Brand	Qimarox
Model	PRORUNNER Mk5
Category	Accessories
Language	English