Qimarox PRORUNNER Mk5 User Manual

Maintenance RollerDrive conveyor
86 UM-PRORUNNER_Mk5-1.2-EN-US
8.2 Preventive maintenance schedule, RollerDrive conveyor
8.2.1 Daily maintenance
/i
8.2.2 Weekly maintenance
/i
Item Task Action when required by the
check
Guards and covers Check for visible damage. Replace damaged guards and /
or covers.
Check if the mounting materials
are present and have been cor-
rectly placed.
Place the mounting materials or
correct the way in which they
have been fastened.
Entire machine Check for visible dirt. Clean the machine. Refer to
section 8.3.
Item Task Action when required by the
check
Rollers Check for visible damage to the
surface and sides.
Replace damaged rollers. Refer
to section 8.7.
Clean. Refer to section 8.3.
Make sure the rollers run freely
and smoothly.
Replace the roller. Refer to sec-
tion 8.7.
Check the Poly-V drive head for
damage.
Replace the roller. Refer to sec-
tion 8.7.
Check for running sounds. Replace the roller. Refer to sec-
tion 8.7.
Drive roller Check for damage on the run-
ning surface.
Replace the drive roller. Refer
to section 8.7.
Clean. Refer to section 8.3.
Check the Poly-V drive head for
damage.
Replace the drive roller. Refer
to section 8.7.
Check for running sounds. Replace the drive roller. Refer
to section 8.7.
Belts Check for damage. Replace damaged belts. Refer
to section 8.7.
Clean. Refer to section 8.3.
Check for visible deformation. Replace the belt. Refer to
section 8.7.

Qimarox PRORUNNER Mk5 Specifications

General

Brand	Qimarox
Model	PRORUNNER Mk5
Category	Accessories
Language	English