Qimarox PRORUNNER Mk5 User Manual

UM-PRORUNNER_Mk5-1.2-EN-US 49
Installation
6.3 Transport
If the machine is delivered as a whole and in
the horizontal position, it is packaged in
cardboard. The forks of the fork-lift truck must
be placed where cardboard has been applied
(B). When the machine (A) is picked up at the
places where cardboard has been applied, the
centre of gravity is achieved. The packaging
also indicates the minimum length of the forks.
6.3.1 General preparation
1. Calculate the total weight before moving the machine.
- The weight of the machine is given on the type plate. Refer to section 2.1.
- Add to this, the weights of any attachments to the machine, for example, product
conveyors. The weights are given on the type plates of the product conveyors.
6.3.2 Horizontal transport
Prepare for transport
1. Install the transport supports (A). For this
use hexagonal bolts M12 with a minimum
strength class of 8.8.
B
A
A
A
A
A
A

Qimarox PRORUNNER Mk5 Specifications

General

Brand	Qimarox
Model	PRORUNNER Mk5
Category	Accessories
Language	English