UM-PRORUNNER_Mk5-1.2-EN-US 9
About this manual
1 About this manual
1.1 Introduction
This manual provides information about the PRORUNNER Mk5 machine, that is used for
the vertical movement of goods within a transport system. From here on in this manual,
the PRORUNNER Mk5 is referred to as the “machine”.
This manual is intended for:
• Retailers/Original Equipment Manufacturers (OEM) project engineers and mechanics.
• Operators, installers and maintenance engineers.
System integrators/OEMs
This manual explains machine configurations you can use to set up the machine. It also
provides instructions on how to add or change the machine’s technical components.
Users
The machine may be supplied pre-assembled; if so, some chapters in this manual will not
be applicable. To integrate the machine within a conveyor system, Qimarox advises you to
refer to documentation provided by the OEM of the transport system.
1.2 Product documentation
/i
1.3 Source language
This manual was originally written in the English language.
WARNING
For optimal safety, carefully read this manual before using the PRORUNNER
Mk5.
Document Reference
Machine manuals
*
* Generic information for each machine, apart from exceptions outlined in the machine lay-
out drawing.
UM-PRORUNNER_MK5-1.1-ENG
Machine assembly instructions
*
AI-PRORUNNER_MK5-1.1-ENG
Machine layout drawing
**
** Machine specific information.
Refer to section 2.2
OEM parts of the machine:
• Bolts and nuts
• Geared motor
• Motor reductor
• Photocells
• Runners
• Chain
• Induction switches
• Belts
To Next Page
Loading...
Need help?
General