UM-PRORUNNER_Mk5-1.2-EN-US 107
Maintenance driven roller conveyor
12.9 Tightening/loosening the belt
The belt will elongate with use. How fast this happens depends on the conditions of use.
Most of the elongation happens after first putting the machine into operation.
• A belt with insufficient tension will slip and may not convey the product properly.
12.9.1 How to tighten/loosen the belt
1. Be sure the new belts have the correct length to obtain a correct wheel tension.
12.10 Replace parts
Some machine parts are subject to wear. See the type plate and the exploded view for the
specifications of the machine parts.
WARNING
Replace parts only with parts supplied or recommended by Qimarox.
If parts are not replaced with supplied or recommended Qimarox parts, the
machine warrantee becomes null and void. Refer to section 2.3.
To Next Page
Loading...
Need help?
General