Qimarox PRORUNNER Mk5 User Manual

General
16 UM-PRORUNNER_Mk5-1.2-EN-US
2.2 Machine layout drawing and specifications
After a machine order is placed, you will receive an approved machine drawing layout (see
fig. 1) and specifications sheet (see fig. 2).
Fig. 1 Approved machine drawing
Fig. 2 Specifications sheet
This drawing and specifications sheet
includes:
• The machine serial number.
• Product dimensions and mass.
• Lift dimensions.
• Lift configuration.
• Motor specifications.
• The number of transport carriers.
The machine can only be used according to the specifications in this manual and the
machine layout drawing specifications. If you want to use the machine outside the
recommended specifications, you must contact Qimarox to check if this is possible.
Inappropriate and/or modified use of the machine can result in dangerous safety issues
and/or damage. You must obtain written confirmation from Qimarox before using the
machine in a modified or unspecified manner. Qimarox cannot be held liable for any
accidents and/or damages that may occur through inappropriate unauthorised use of the
machine.
Note
The machine layout drawing illus-
trated (fig. 2) shows an example.
Side view
Front view
1162
939
Footprint
Keep clear for maintenance
S1975
0
Bottom
D
Top
Top
Bottom
Top
Bottom
340
510
255
Top
Top
Bottom
Top
Bottom
Max. contour
Min. contour
Top
Top
Bottom
Motor
not
to scale
Top
Bottom
Top
Bottom
0
Fork
Top
Front
100
140
B
Top
Bottom
Top
Bottom
Side
0
+50 -20
FOR APPROVAL
Collision check :
Product data :
Date Name
Serial nr.
Drawn
Check
Product elevator PRORUNNER mk5
rev.
American
projection
Scale
00
RSt
170
85
140
H
A
E
FC
G
8
6
4
5
1
27
3
Approx. 0
1071
446
Back view
A1725
Motor
not
to scale
TopTop
Top
Bottom
Top
Top
Bottom
Top
Bottom
75
10
Top
Bottom
Top
Bottom
965
483
TOP
470
Top
Bottom
Top
Top
(Fencing not drawn)
Nobelstraat 43 - NL 3846 CE Harderwijk T +31 - 341 436 700 F +31 - 341 436 701 E info@qimarox.com I www.qimarox.com
PRORUNNER mk1
Order number
QPR131001
Serial number
mk11301407
Customer
Designation / Line number
Revison
00
Date
13-2-2013
By
RSt
ELEVATOR TYPE
Elevator type
Standard
Carrier type
Standard
Carrier lowering / correction [mm] 0
Sorter application
No
CAPACITY
Specified capacity [products/hour]
1200
Calculated elevator speed [m/s]
0,27
Calculated capacity [products/hour]
1200
PRODUCT
Length [mm]
400
600
Width [mm]
300
600
Heigth [mm]
200
Mean max. weight [kg] - calcuation hoist
20
Max. weight [kg] - calculation carrier
20
25
INFEED
Type of drive
Motor
Product orientation / alignment
SSL
Centered
Position
SIDE
LEFT
Heigth [mm]
702
702
OUTFEED
Type of drive
Motor
Product orientation SSL
Position
SIDE
RIGHT
Heigth [mm]
3750
702
ELEVATOR
Additional column heigth [mm]
Nominal column height [mm] 4250
Required operating height / free space [mm] 4381
100
Selected elevator speed [m/s]
0,40
0,5
FEEDING conveyor
Products pre-separated
No
Speed [m/s]
0,30
INFEED conveyor
Speed [m/s]
0,50
0,8
Time for infeed [s] 1,4
OUTFEED conveyor
Speed [m/s]
0,50
0,8
Time for outfeed [s] 1,0
EXIT conveyor
Qimarox
Beursli EU
Configuration PRORUNNERmk5 - 1301407 (rev.00).xlsx p1/3

Qimarox PRORUNNER Mk5 Specifications

General

Brand	Qimarox
Model	PRORUNNER Mk5
Category	Accessories
Language	English