UM-PRORUNNER_Mk5-1.2-EN-US 27
Description
4.1.2 Motor
The motor drives the circulation of the vertical conveyor. For some configurations it may be
necessary to control the motor with a frequency controller for controlled start/stop and
optimum adjustment of the rotation speed to the supply speed. If a frequency controller is
required, refer to the machine layout drawing. If a frequency controller is used, EMC
directives must be observed and the device should be installed according to the
manufacturer specifications.
The infeed/outfeed conveyor may also have a motor fitted. For specifications, refer to the
machine layout drawing.
4.2 Working principle with fixed conveyors
/i
S1 Supply conveyor sensor (not supplied by Qimarox)
B7 End of infeed conveyor sensor
B1 Product release sensor
B8
B9
S1
B7
B1
B3
To Next Page
Loading...
Need help?
General