R&S LCX Series - Configuring CSV Data; Date & Time

General instrument settings
R&S
®
LCX Series
123User Manual 1179.2260.02 ─ 02
Field Delimiter
Selects the line separator between individual parameters or values.
"Semicolon"
Separates the data entries by a semicolon.
"Comma"
Uses a comma.
Decimal Separator
Selects the decimal separator for values.
"Dot"
Sets a decimal point.
"Comma"
Uses a comma.
Error Designator
Selects whether an empty cell is filled with 0.
"IEE Float"
Fills empty cells with 0.
"Empty"
Leaves empty cells.
Line End Marker
Selects the character representing a line break.
"CR/LF"
Inserts a line break with both, either a CR or an LF.
"LF"
Inserts a line beak with an LF.
9.5.2 Configuring CSV data
For subsequent acquisition of logged data with a PC application, you can determine
the separators and designators of the measurement values accordingly.
Configuring csv data
To configure the format of data within the file:
1. Press the [settings] key at the front panel.
2. Select
3. To access the csv settings, select [settings] > "Device" > "CSV Settings".
4. Set the field and line separators, e.g:
a) Select "Field delimiter" > "Semicolon".
A selection dialog opens where you can set the delimiter.
b) Confirm the selection with "Set".
5. Repeat the configuration for each data separator and the error indicator.
9.6 Date & time
Using the "Date & Time" function, you can set a date and time.
Date & time