General instrument settings
R&S
®
LCX Series
129User Manual 1179.2260.02 ─ 02
2. To remove the option manually, select "Remove" in the license dialog.
The R&S LCX displays the "Enter Deactivation Key" on-screen keypad.
3. To enter the license key, proceed the same way as described in "Inserting the
license key manually" on page 128.
The instrument uninstalls the license and displays the message "Devicekey is
removed". It deactivates the option displays it in the "Deactivation" window.
4. For the deactivation to take effect, restart the R&S LCX.
The instrument restarts and lists the deactivated in the "Deactivation" window.
9.10 Device information
To get an overview on the configuration of your instrument, you can retrieve informa-
tion on the instrument model, its hardware components and interfaces using the device
information function.
9.10.1 Device information settings
Access:
1. Press the [settings] key at the front panel.
2. In the "Device" tab, select "Device Information".
The "Device Information" window shows the characteristics of the instrument
assemblies. It also indicates the remaining available internal memory.
The required remote commands are described in Chapter 11.15, "SYSTem subsys-
tem", on page 211.
Device Information...................................................................................................... 129
Create Dump File........................................................................................................130
Device Information
Displays the main instrument information.
Device information
To Next Page
Loading...
Need help?
General
