EasyManua.ls Logo

R&S LCX Series - Sound

R&S LCX Series
242 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
General instrument settings
R&S
®
LCX Series
125User Manual 1179.2260.02 ─ 02
Access:
1. Press the [settings] key at the front panel.
2. In the "Device" tab, select "Appearance".
Figure 9-10: Appearance settings menu
The appearance menu provides access to on-screen editors for adjusting the
brightness of the screen and front panel keys.
The required remote commands are described in Chapter 11.9, "DISPLay subsys-
tem", on page 192 and Chapter 11.15, "SYSTem subsystem", on page 211.
How to: see "Customizing the appearance" on page 137.
Display Brightness...................................................................................................... 125
Key Brightness............................................................................................................125
Display Brightness
Sets the brightness of the display in percent.
Remote command:
DISPlay:BRIGhtness on page 193
Key Brightness
Sets the intensity of the key illumination in percent.
Remote command:
SYSTem:KEY:BRIGhtness on page 220
9.8 Sound
The R&S LCX provides the option for issuing an acoustic signal if there is an error.
Access:
1. Press the [settings] key at the front panel.
2. In the "Device" tab, select "Sound".
Sound

Table of Contents

Other manuals for R&S LCX Series

Related product manuals