To Next Page

To Previous Page

Getting started

R&S

LCX Series

46User Manual 1179.2260.02 ─ 02

b) Press the [rotary knob].

The selection editor opens.

c) Turn the knob to scroll within the list.

d) Press the [rotary knob] again to confirm your selection.

6. To access the main menus and subdialogs, use the functionality of the [rotary

knob] and the [◀] or [▶] keys the same way.

Entering alphanumeric parameters

If a field requires alphanumeric input, you can use the on-screen keyboard to enter let-

ters and (special) characters.

Access and control are similar as described above.

4.4.3 Remote control

In addition to operating the R&S LCX directly on the instrument, it is also possible to

operate and control it from a remote PC.

Remote control interfaces

The R&S LCX provides several interfaces for remote control:

●

Ethernet (LAN) interface

●

USB standard interface

●

IEE-488 bus interface (GPIB) (option: R&S NG-B105)

For detailed information on how to configure the remote control interfaces, see Chap-

ter 10, "Network operation and remote control", on page 139.

See Chapter 4.1.7, "Connecting to LAN", on page 21 for an example on how to set up

LAN connection for remote control.

Instrument control

R&S LCX Series User Manual

Other manuals for R&S LCX Series