R&S LCX Series - Test Fixture with Cables for Transformer Components

Measurement setups
R&S
®
LCX Series
55User Manual 1179.2260.02 ─ 02
Figure 6-4: R&S LCX-Z4 SMD test tweezers
The test fixture is equipped with tweezers, and miniature SMD tweezers.
To perform short correction, close the hold contacts of the tweezers. For open correc-
tion, leave the contacts open.
6.1.5 Test fixture with cables for transformer components
The transformer R&S LCX-Z5 test fixture is designed for measuring transformers or
transmitters in combination with transformers.
About test fixtures