R&S LCX Series - Appearance

General instrument settings
R&S
®
LCX Series
124User Manual 1179.2260.02 ─ 02
The time is regarded as UTC. There is no timezone selectable.
The R&S LCX records the time during operation and creates a time stamp on printed
outputs or in saved datasets.
Access:
1. Press the [settings] key at the front panel.
2. In the "Device" tab, select "Date & Time".
Figure 9-9: Date and time settings menu
The "Date & Time" menu provides access to dialogs and editors for setting the cor-
responding parameters. Initially, the R&S LCX indicates the date and time setting
of the operating system. You can update or modify this setting individually.
The required remote commands are described in Chapter 11.15, "SYSTem subsys-
tem", on page 211.
How to: see "Setting date and time" on page 136.
Set Date
Sets the date in the format [yyyy.mm.dd].
Remote command:
SYSTem:DATE on page 219
Set Time
Sets the time in the format [hh.mm.ss].
Remote command:
SYSTem:TIME on page 221
Change Clock Format
Sets the hour display of a day.
You can switch between "24 hours"and "48 hours" display.
9.7 Appearance
The R&S LCX enables you to customize the appearance of the screen and the front
panel keys.
Appearance