R&S LCX Series - Dimeasure Subsystem

Remote control commands
R&S
®
LCX Series
188User Manual 1179.2260.02 ─ 02
Usage: Query only
Manual operation: See "Delete" on page 114
DATA:POINts? <File Path>
Queries the number of measurement readings saved in a file.
Query parameters:
<File Path>
Example: See Chapter 11.7, "DATA subsystem", on page 186.
Usage: Query only
11.8
DIMeasure subsystem
Option: R&S LCX-K106
The DIMeasure subsystem contains the commands for configuring and executing
dynamic impedance measurements.
The dynamic impedance measurement parameter limits can vary depending on the fre-
quency, voltage and range setting of the test signal.
DIMeasure subsystem