EasyManua.ls Logo

R&S LCX Series - System:beeper:warning:state; System:beeper:warning[:Immediate]; System:beeper[:Complete]:State; System:beeper[:Complete][:Immediate]

R&S LCX Series
242 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Remote control commands
R&S
®
LCX Series
216User Manual 1179.2260.02 ─ 02
SYSTem:BEEPer:WARNing:STATe <En-/Disable warning beep>
Activates the R&S LCX to create an acoustic signal on errors and warnings.
The query returns the current state.
Parameters:
<En-/Disable warning
beep>
1 | 0 | ON | OFF
*RST: 1|ON
Example: See Example "General instrument settings" on page 212.
Manual operation: See "Error Beep" on page 126
SYSTem:BEEPer:WARNing[:IMMediate]
Activates that the R&S LCX issues a beep on error or warning immediately.
Parameters:
<state> 1 | 0 | ON | OFF
*RST: ON | 1
Example: See Example "General instrument settings" on page 212.
Usage: Event
Manual operation: See "Error Beep" on page 126
SYSTem:BEEPer[:COMPlete]:STATe <En-/Disable operation complete beep>
Activates the R&S LCX to create an acoustic signal on a completed operation.
The query returns the current state.
Parameters:
<En-/Disable
operation complete
beep>
1 | 0 | ON | OFF
*RST: ON | 1
Example: See Example "General instrument settings" on page 212.
Manual operation: See "Error Beep" on page 126
SYSTem:BEEPer[:COMPlete][:IMMediate]
Activates that the R&S LCX issues a beep after operation complete immediately.
The query returns the current state.
Parameters:
<boolean> 1 | 0 | ON | OFF
*RST: ON | 1
Example: See Example "General instrument settings" on page 212.
Usage: Event
SYSTem subsystem

Table of Contents

Other manuals for R&S LCX Series

Related product manuals