R&S LCX Series - Licenses; Licenses Settings

General instrument settings
R&S
®
LCX Series
126User Manual 1179.2260.02 ─ 02
Figure 9-11: Sound settings menu
In the "Sound Settings" dialog, you can set an alert.
The required remote commands are described in Chapter 11.15, "SYSTem subsys-
tem", on page 211.
How to: see "Customizing the sound settings" on page 138.
Error Beep...................................................................................................................126
Error Beep
Generates an acoustic signal when an error occurs.
"On"
Beeps on error.
"Off"
No beep.
Remote command:
SYSTem:BEEPer:WARNing:STATe on page 216
SYSTem:BEEPer:WARNing[:IMMediate] on page 216
SYSTem:BEEPer[:COMPlete]:STATe on page 216
SYSTem:BEEPer[:COMPlete][:IMMediate] on page 216
9.9 Licenses
The R&S LCX provides options that you can purchase and activate. An option is ready
to operate after it is enabled with a License key supplied with the option. The license
key is delivered as a file or on paper.
9.9.1 Licenses settings
The "Licenses" manager function enables you to activate an option with a license key
you can install either from an *.xml file, or enter manually.
Access:
1. Press the [settings] key at the front panel.
2. In the "Device" tab, select "Licenses".
Licenses