R&S LCX Series - SaveRecall; SaveRecall Settings

General instrument settings
R&S
®
LCX Series
133User Manual 1179.2260.02 ─ 02
9.12 Save/recall
The "Save/Recall" function enables you to save a certain configuration in a file and
reload it for later reuse.
On power-on, the R&S LCX starts up in the configuration you used before switching
off. It saves the configuration, including autosaved settings in the internal memory
automatically.
With a USB stick connected, you can save a file on either the internal memory or the
USB stick, with "Internal" as default setting. Without USB connected, the R&S LCX
saves the file internally in the file path /int/settings.
9.12.1 Save/recall settings
With the "Save/Recall Device Settings" functions, you can save the complete instru-
ment settings in files, and reload the settings for reuse.
Access:
1. Press the [settings] key at the front panel.
2. In the "Device" tab, select "Save/Recall Device Settings".
Figure 9-14: Save/Recall menu
The "Save/Recall" menu provides access to dialogs and editors for managing and
saving instrument settings.
How to: see Chapter 9.12.2, "Using the save/recall function", on page 134
Settings
Save Settings to file.................................................................................................... 133
Recall Settings from file.............................................................................................. 134
Default Settings...........................................................................................................134
Factory Reset..............................................................................................................134
Save Settings to file...
Saves the current instrument settings under the defined filename.
The R&S LCX opens a file manager window and enables you to replace an existing file
or create a file user-definable file name.
Save/recall