R&S LCX Series - Function Subsystem

Remote control commands
R&S
®
LCX Series
194User Manual 1179.2260.02 ─ 02
DISPlay[:WINDow]:TEXT[:DATA] <Message>
Enables you to post a text message on the display.
To close user defined message, use command DISPlay[:WINDow]:TEXT:CLEar
on page 193.
Setting parameters:
<Message> Text message for display.
Example: See Example "Configuring the display brightness and user
defined text messages" on page 193.
Usage: Setting only
11.10
FUNCtion subsystem
The FUNCtion subsystem enables you to configure the measurement type and
ranges.
FUNCtion subsystem