R&S LCX Series - Count; Duration; Set Date & Time; Start Time

Instrument functions
R&S
®
LCX Series
97User Manual 1179.2260.02 ─ 02
Remote command:
LOG:INTerval on page 203
Count
Sets the number of measurement readings for data logging Mode > Count.
Remote command:
LOG:COUNt on page 202
Duration
Sets the time period for data logging Mode > Duration or Mode > Span.
The maximum logging duration is 96 hours.
Remote command:
LOG:DURation on page 202
Start Time
Sets the time for starting data logging in Mode > Span.
At first, you can set the date. When confirmed, the dialog for setting the time opens
automatically.
How to: see "Configuring logging settings" on page 98.
Remote command:
LOG:STIMe on page 204
Set Date & Time ← Start Time
Accesses the "Set Date & Time" function to configure a date and time stamp for the
recorded data in logging Mode > Span.
How to: see "Configuring logging settings" on page 98.
Remote command:
LOG:STIMe on page 204
8.8.3.2 Using the logging function
The logging function enables you, to record the measurement readings. The R&S LCX
stores the data with a generically created file name either on the USB stick or in the
instrument internal memory directory.
Selecting the memory location
To determine the destination for saving the logging data file:
1. Press the [settings] key at the front panel.
2. In the "Functions" tab, select "Logging".
3. To determine the memory location, e.g., manually:
a) Select "Save Location".
The R&S LCX opens a selection editor.
b) In the selection editor, select "Manual".
c) Confirm your selection.
Specific instrument functions