R&S LCX Series - System:communicate:network:vnc:port; System:communicate:network:vnc[:State]; System:date

Remote control commands
R&S
®
LCX Series
219User Manual 1179.2260.02 ─ 02
SYSTem:COMMunicate:NETWork:VNC[:STATe] <En-/Disable VNC>
Activates the VNC interface for remote access.
Parameters:
<En-/Disable VNC> ON | OFF | 1 | 0
*RST: n.a. (factory preset: 0)
Example: See Example "Network communication settings" on page 214.
Manual operation: See "Enabled" on page 154
SYSTem:COMMunicate:NETWork:VNC:PORT
<Port>
Sets the VNC port address.
Parameters:
<Port> Range: 100 to 65535
*RST: n.a. (factory preset: 5900)
Example: See Example "Network communication settings" on page 214.
Manual operation: See "VNC Port" on page 154
SYSTem:COMMunicate:NETWork:VNC[:STATe] <En-/Disable VNC>
Activates the VNC interface for remote access.
Parameters:
<En-/Disable VNC> ON | OFF | 1 | 0
*RST: n.a. (factory preset: 0)
Example: See Example "Network communication settings" on page 214.
Manual operation: See "Enabled" on page 154
SYSTem:DATE <Year>, <Month>, <Day>
Sets or queries the date for the instrument-internal calendar.
Parameters:
<Year> Sets the year.
Range: 2010 to 2037
<Month> Sets the month.
Range: 1 to 12
<Day> Sets the day.
Range: 1 to 31
Example: See Example "General instrument settings" on page 212.
Manual operation: See "Set Date" on page 124
SYSTem subsystem