R&S LCX Series - LOG Subsystem

Remote control commands
R&S
®
LCX Series
200User Manual 1179.2260.02 ─ 02
The query returns the sum of all counts.
Example: See Example "Using the binning function" on page 199.
Usage: Query only
Options: R&S LCX-K107
Manual operation: See "Counter" on page 107
HANDler:BIN:STATistic:RESet
Resets the evaluated binning measurement statistics.
Example:
See Example "Using the binning function" on page 199.
Usage: Event
Options: R&S LCX-K107
Manual operation: See "Counter" on page 107
HANDler:CONFig:PATH <File Path>
HANDler:CONFig:PATH? <File Path>
Uploads the binning configuration file.
Parameters for setting and query:
<File Path>
Example: See Example "Using the binning function" on page 199.
Options: R&S LCX-K107
Manual operation: See "Load From File" on page 105
HANDler[:STATe] <Handler State>
Activates the binning measurement.
Parameters:
<Handler State>
Example: See Example "Using the binning function" on page 199.
Options: R&S LCX-K107
Manual operation: See "Enabled" on page 105
11.12 LOG subsystem
The LOG subsystem contains the commands for setting the parameters of the mea-
surement logging function.
LOG subsystem