R&S LCX Series - Page 105

Instrument functions
R&S
®
LCX Series
105User Manual 1179.2260.02 ─ 02
The required remote commands are described in Chapter 11.11, "HANDler subsys-
tem", on page 198.
Enabled.......................................................................................................................105
Load From File............................................................................................................105
Enabled
Enables the sorting function.
The measurement starts with a trigger signal.
Remote command:
HANDler[:STATe] on page 200
Load From File
Accesses the file manager function to upload the binning configuration file.
Remote command:
HANDler:CONFig:PATH on page 200
8.8.5.4 Binning measurement settings
When you have enabled the binning measurement, the R&S LCX shows the binning
specific measurement results window on the screen.
Access:
1. Press the [settings] key at the front panel.
2. In the "Functions" tab, select "Binning".
3. Load the corresponding binning file as described in "Configuring a binning file"
on page 108 and "Loading the binning file" on page 109.
Specific instrument functions