R&S LCX Series User Manual

General instrument settings
R&S
®
LCX Series
135User Manual 1179.2260.02 ─ 02
The R&S LCX leads you to the memory location to select the file.
3. Confirm you selection with "Load".
The R&S LCX applies the loaded settings.
Recalling default instrument settings
You can reset all instrument settings to factory default values, without affecting your
specific system settings.
To reset the instrument to factory default settings:
1. Select [settings] > "Device" > "Save/Recall Device Settings".
2. Select "Default Settings".
The R&S LCX displays a message that prompts you to confirm.
If confirmed, the R&S LCX resets current instrument settings to factory default.
3. When completed, a confirming message pops up.
4. Confirm to complete the process.
Resetting the instrument to the initial factory settings
You can reset all instrument settings, including the system settings to the factory
default values. In addition, the factory reset can delete all files saved in the internal
memory.
To execute a factory reset, proceed the same way:
1. Select [settings] > "Device" > "Save/Recall Device Settings".
2. Select "Factory Reset".
The R&S LCX displays a message that prompts you to confirm.
Save/recall

R&S LCX Series Specifications

General

Brand	R&S
Model	LCX Series
Category	Measuring Instruments
Language	English