2-446-001 PTr:Std:1 *ENG [0 to 995 / 100 / 5 %/step]
2-446-002 PTr:Std:2 *ENG
2-446-003 PTr: Low: 1st *ENG
2-446-004 PTr: Low: 2nd *ENG
2-446-005 SepaDC:Std:1st *ENG
2-446-006 SepaDC:Std:2nd *ENG
2-446-007 SepaDC:Low:1st *ENG
2-446-008 SepaDC:Low:2nd *ENG
2447 [Plain2:SW Tmng:LE] DFU
Plain 2: Switch Timing: Leading Edge
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge plate at
the paper leading edge of the plain 2 paper between the erase margin area and the
image area.
Std: 260 mm/sec, Low: 85mm/sec
2-447-001 PTr:Std:1st *ENG [0 to 50 / 0 / 2 mm/step]
2-447-002 PTr:Std:2nd *ENG
2-447-003 PTr: Low : 1st *ENG
2-447-004 PTr: Low : 2nd *ENG
2-447-005 SepaDC:Std:1st *ENG
2-447-006 SepaDC:Std:2nd *ENG
2-447-007 SepaDC:Low:1st *ENG
2-447-008 SepaDC:Low:2nd *ENG
Engine SP Mode Tables - SP2000
327
To Next Page
Loading...
