2-822-001 PTr:Mid:1st *ENG [0 to 50 / 0 / 2 mm/step]
2-822-002 PTr:Mid:2nd *ENG
2-822-003 PTr: Low : 1st *ENG
2-822-004 PTr: Low : 2nd *ENG
2-822-005 SepaDC:Mid:1st *ENG
2-822-006 SepaDC:Mid:2nd *ENG
2-822-007 SepaDC:Low:1st *ENG
2-822-008 SepaDC:Low:2nd *ENG
2823 [SP 2:TE Correct] DFU
Special 2 Paper: Trailing Edge Correction
Adjusts the correction to the paper transfer roller current for the paper trailing edge in
each mode. SP2803 and SP2807 are multiplied by these SP values.
Middle: 182 mm/sec, Low: 85 mm/sec
• The paper trailing edge area can be adjusted with SP2824.
2-823-001 PTr:Mid:1 *ENG [0 to 995 / 100 / 5%/step]
2-823-002 PTr:Mid:2 *ENG
2-823-003 PTr: Low: 1st *ENG
2-823-004 PTr: Low: 2nd *ENG
2-823-005 SepaDC:Mid:1st *ENG
2-823-006 SepaDC:Mid:2nd *ENG
2-823-007 SepaDC:Low:1st *ENG
2-823-008 SepaDC:Low:2nd *ENG
Engine SP Mode Tables - SP2000
387
To Next Page
Loading...
