5-857-101 Start Date *CTL [- / 20120101 / 1 /step]
Sets start date of the debug log output.
5-857-102 End Date *CTL [- / 20371212 / 1 /step]
Sets end date of the debug log output.
5-857-103 All Logs *CTL [Execute]
Obtains all debug logs.
5-857-104 Controller Logs *CTL [Execute]
Obtains controller debug log only.
5-857-105 Engine Debug Logs *CTL [Execute]
Obtains engine debug log only.
5-857-107 Opepanel Debug Logs *CTL [Execute]
Outputs the controller debug log to the
media inserted front I/F
5-857-120 Make LogTrace Dir *CTL [Execute]
Makes a folder for the log trace in the SD
card.
5860 [SMTP/POP3/IMAP4] *CTL -
5-860-002 SMTP Srvr Port no. Input the SMTP server port number.
5-860-003 SMTP Auth SMTP authentication enable/disable
5-860-006 SMTP Auth Encryp Encryption mode for SMTP authentication
enable/disable (Only valid if 5860 3 is
set to "enable")
5-860-007 POP before SMTP Enable/disable POP before SMTP. If the
SMTP server does not have
authentication, you can enable POP
before SMTP, them POP authentication is
available (SP 5860 13)
5. System Maintenance Reference
462
To Next Page
Loading...
