No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
875 CTL
D
Delete All error 2: Data area
An error is detected while all of the HDD or NVRAM are formatted logically by
the DataOverwriteSecurity Unit.
• The logical format for the HDD fails.
Turn the main switch off/on and try the operation again
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
876 CTL
D
Log Data Error
An error was detected in the handling of the log data at power on or during
machine operation. This can be caused by switching the machine off while it is
operating.
-001 Log Data Error 1
• Damaged log data file in the HDD
Initialize the HDD.
-002 Log Data Error 2
• An encryption module not installed
1. Disable the log encryption setting with SP9730-004 ("0" is off.)
2. Install the DESS module.
-003 Log Data Error 3
• Invalid log encryption key due to defective NVRAM data
1. Initialize the HDD.
2. Disable the log encryption setting with SP9730-004 ("0" is off.)
-004 Log Data Error 4
• Unusual log encryption function due to defective NVRAM data
Initialize the HDD.
SC Tables
607
To Next Page
Loading...
Need help?
General
