Rinstrum R427 - Page 111

Reference Manual Rev 1.13
004R-646-113 Page 111
Status info Bit
Unused Bits 30-32
Interlock error (K422 only) 29
Wrong direction error (K422 only) 28
Captured weight below min error (K405 and K422 only) 27
Motion error (static weighing mode) (K405 and K422 only) 26
Too slow error (K422 only) 25
Too fast error (K422 only) 24
No axle weighing error (K405 and K422 only) 23
Waiting state (K405 and K422 only) 22
Captured state (K405 and K422 only) 21
Sampling state (K405 and K422 only) 20
Idle state (K405 and K422 only) 19
Above min weight (K405 and K422 only) 18
Below min weight (K405 and K422 only) 17
No errors 16
Overload 15
Underload 14
Error 13
Preset tare not active 12
Preset tare active 11
High range 10
Low range 9
Stable 8
Motion 7
Not centre-of-zero 6
Centre-of-zero 5
Not Zero 4
Zero 3
Gross 2
Net 1
SETP info Bit
Unused Bits 17-32
Not setpoint 8 16
Not setpoint 7 15