Reference Manual Rev 1.13
Page 34 004R-646-113
5.14. Alibi
A long press of the +/- key (Alibi) will switch the instrument to Alibi mode. Alibi
mode is used to verify scale readings. To return from Alibi mode, long press the +/-
key (Alibi) again.
5.14.1. Switching to Alibi Mode
5.14.2. Returning from Alibi Mode
5.14.3. Viewing DSD records in Alibi mode
From Alibi mode you can view DSD records (when a DSD is fitted) by pressing the
up arrow key to view the latest record, pressing the down arrow key to view the
oldest record or by entering a number than pressing the OK key to view that specific
record. Once viewing records you can use the +/- key to display the different
information stored in the record, use the up arrow key to move onto the next record
or use the down arrow key to move onto the previous record. Once you are finished
viewing records you can return to Alibi mode by pressing the C key.