Rinstrum R427 - Sfn: UNITS (Unit Switching Functions); Sfn: HOLD

Reference Manual Rev 1.13
004R-646-113 Page 69
12.4.7. SFn: UNITS (Unit Switching Functions)
Path Description
FUNC
└ SFn
└TYPE : UNITS
└ KEY
└ MODE
└ UNIT
(*)
└ U.STR
(*)
Unit Switching enables the display and printing of
alternative units to those used for the primary
calibration of the instrument.
KEY: Select key or external input to use.
MODE: Sets the unit switching mode. Options are:
 kg/lb (default): The instrument will convert
kilograms to pounds or pounds to kilograms
(depending on the primary unit).
 CUSTOM: The instrument will convert
primary units to a custom unit defined by an
entered conversion factosr.
UNIT (Alternative Unit Annunciator): Set the
symbols to use for alternative units on the
instrument display. Options are:
 N: Useful for Newtons of Force.
 ARROW.U: Upper unit arrow
 P: useful for Pints.
 L: lower case ‘l’ for litres.
 ARROW.L: Lower unit arrow
U.STR (Unit String): Four character alternative units
string. Used in printing alternative units.
KEY Values <OPT>
None
(Default)
, F1 .. F3,
IO1 .. IO32
MODE Values <OPT>
 kg/lb
(Default)
 CUSTOM
UNIT Values <OPT>
 NONE
(Default)
 N
 ARROW U
 P
 L
 ARROW L
U.STR Values <STR>
4 character string
12.4.8. SFn: HOLD
Path Description
FUNC
└ SFn
└TYPE : HOLD
└ KEY
The hold key/input implements a manual hold.
KEY: Select key or external input to use.
KEY Values <OPT>
None
(Default)
, F1 .. F3,
IO1 .. IO32