Reference Manual Rev 1.13
004R-646-113 Page 27
5.4. Tare Key
This key is used to temporarily set the scale to zero. The display will
show the Net weight and the NET annunciator will be lit.
The weight tared is deducted from the allowable range of the scale,
reducing the maximum weight that can be displayed.
Preset Tare: Preset Tare values are entered using the Numeric Keys followed by
the TARE key. (E.g. to enter 1.5kg as a preset tare, press <1> <.> <5> <TARE>)
The tare adjustment is stored when power is removed and is re-used when next
powered up.
5.4.1. Setting Preset Tare on a Permanent Truck ID
5.4.2. Setting Preset Tare on a Temporary Truck ID
To Next Page
Loading...
Need help?
General
