Reference Manual Rev 1.13
004R-646-113 Page 115
18.1. Trade Label
A trade label showing scale and instrument
information is usually required. This can
be placed on the front of the instrument:
Figure 14: Trade label position.
18.2. Lead Seals
Figure 15: Lead seal on rear of instrument. Figure 16: Lead Seal on boot
18.2.1. Destructible Sticker Seals
Figure 17: Destructible sticker seal on rear Figure 18: Destructible sticker seal on boot.
18.2.2. Electronic Seal
The value of the calibration counter should be written on the scale
certification/sealing sticker. See page 53 calibration counter details.
To Next Page
Loading...
